Monday, 10 July 2017

Overview of Illegal Parking & Stop Detection System

Inpeg vision has been recognized for excellence in product quality through various certification and patents. Company has developed and manufactured various ITS system based on License plate recognition (LPR) .
Company aim is to provide good solutions for parking area holders. Have lot of valuable products like


  • Total parking management system
  • Intelligent integrated ITS
  • Illegal parking and stop detection system

Overview - Speed dome camera 

Get location coordinate of illegal parking and stop vehicles through fixed camera then when fixed camera send signal to speed dome camera it automatically zoom and take a picture and recognize plate number and send to center.

Model: IV-UOMS-100
  • 1/3" 2 Megapixel CMOS Sensor
  • x960 Zoom (Optical x30 / Digital x32)
  • Multi-codec support : H.264 / MJPEG
  • Intelligent Vary focal IR (Infra-Red) LED Control

Feature
  • True Day & Night with ICR (IR Cut Filter)
  • 1280X720p resolution at 60FPS
  • 1920x1080p resolution at 30FPS
  • Multi-stream with variable resolution & frame

- 1st stream : H.264 / MJPEG @ up to 1080p
- 2nd stream : H.264 / MJPEG / MPEG4 @ up to D1
- 3rd stream : H.264 / MJPEG / MPEG4 @ up to CIF
  • Stream based motion detection
  • Multi-codec audio support : G.711 / G.726
  • Two-way audio supported (Full Duplex)
  • Alarm Input (1ch) / Alarm Output (1ch)
  • SD / SDHC card support

Overview - Control center device

This installed in control room and parking management room and display parked vehicles in each floor and count all entering/leaving vehicles and transmit communication to entry parking indicator then the parking indicator indicate and control vehicle moving route.

Model: IV-IOMS-100
  • Indicate "available or occupied" each floor
  • Display total entering vehicles, parked vehicles every floor
  • Work with entry electric parking lot display board
  • Set-up separately by each floor
  • Features
  • Set-up each floor's available parking lot number by manager. In case of full parking lot it send signal and control vehicle
  • In case of necessity, it can send full parking lot signal and control vehicles even if it is not full parking lot

Specification
  • CPU - Micro Processor 8bit
  • Digital display part - Digital watch (6 lines), Total entering vehicles (6 line),
  • Total leaving vehicles (4 line), Parked vehicles for each floor (3 line)
  • Input/output - Total vehicles output relay contact (zero voltage, 5A)
  • Data transmission - RS 422
  • Operating temperature - 0℃ ~ +45℃
  • Operating power - AC 220V, 60Hz (The third-class ground connection)
  • Power consumption - 32W
  • Type - Wall-type
  • Housing material - Steel 1.2t
  • Linkage equipment - Vehicle detector, entrance message board

Specification
  • Power - DC 12V, 3A
  • Image pickup device - Progressive CMOS 1/3"
  • Number of pixel - 1.3Mega pixel
  • Resolution - 1280 (H) x 1024 (V)
  • Dynamic range - 50dB
  • Frame - 30fps
  • Auto Iris - DC Type support
  • Exposure - Semi-auto exposure, AGC support > 120dB
  • Backlight - Semi-auto
  • Minimum luminance - F1.4 ~ 0.5
  • ATW - Semi-auto
  • Preset - 255

Are you looking for Parking LPR camera system? Inpeg Vision, one of the leading manufacturer of various Integrated ITS system offers Crime prevention system and parking management solution. 

No comments:

Post a Comment